SimuLase
SimuLase SimuLase_Designer
Updates ()
Download Demos
SimuLase
SimuLase_Designer
Buy Online
SimuLase_Designer

Gain Databases
Introduction
Product
Theoretical Models
How We Do It
How Not To do It
Real Life Examples
Specific Examples
Closed Loop Design
PL Analysis
On-Wafer Testing
Publications


Theoretical Models

How We do It


All Gain Table calculations are based on state of the art fully microscopic many-body models. The only input these models require are the nominal structural design (layer width, material compositions and possible doping concentrations) and well known basic material parameters that can be found in the standard literature, like bulk bandstructure parameters (Luttinger parameters, strain constants and bandgaps), lattice constants, phonon coupling constants, background refractive indices, dielectric constants and band-offsets.

They do not require or allow any phenomenological fit parameters like line broadenings, dephasing times or radiative- or Auger-recombination constants. They have been tested for various materials and device configuration to yield quantitatively correct results within the scattering of the experiment (see the examples). Thus, they are truly predictive.

For all calculations we use fully coupled 8x8 kp-bandstructure models (see Refs.[10], [31]). For dillute Nitrides this is coupled to an anti-crossing model for the conduction bands (see Ref.[8]).

If internal electric fields due to piezoelectric effects or ionized dopants or external electric fields due to applied Voltages are present, the screening of these fields by charge inhomogenities is included by coupling the bandstructure calculation self consistetly to a Poisson solver.

Although not required by the models, Gain Tables generally assume that the carriers are in thermal equilibrium and can be described by Fermi distribution. Non-equilibrium effects like carrier relaxation and spectral hole burning and their influence on spectral properties can be investigated in a consulting type enviroment.


Details about the theoretical models can be found in the SimuLase manual and our various publications.

The typical use of SimuLase™ and data created by it is described for the examples of an edge emitting device and a VECSEL in the examples gude.



Gain/Absorption and Carrier Induced Refractive Index




The gain/absorption and carrier induced refractive index changes are calculated solving the semiconductor-Bloch equations, i.e. the equations of motion for the microscopic optical polarisations. Here, incoherent processes, electron-electron and electron-phonon scattering, are treated explicitely by solving the corresponding quantum-Boltzmann type scattering equations in second Born-Markov approximation. As demonstrated here, this is not only necessary for correct lineshapes, but also for amplitudes and spectral positions. In these calculations we also include the Coulomb induced inter subband coupling and the conduction band nonparabolicity.

For more details about this approach see e.g. Ref.[10] or H. Haug, and S.W. Koch, "Quantum Theory of the Optical and Electronic Properties of Semiconductors", Fourth Edition (World Scientific, New York, 2004).



Spontaneous Emission (Photo Luminescence) and Radiative Carrier Losses




The spontaneous emission and the corresponding radiative carrier lifetime are calculated using the semiconductor luminescence equations. These are the microscopic equations of motion for the photon assisted polarisations and distribution functions. As for the gain calculations, they involve the solution of quantum-Boltzmann type scattering equations for electron-electron and electron-phonon collisions. They also involve the numerically expensive determination of excitonic correlations.
The shortcomings of the often used, numerically much simpler Kubo-Martin-Schwinger method (a simple integral conversion of absorption/gain spectra into spontaneous emission spectra) are demonstrated here.

For more details about this approach see e.g. Ref.[28] or M. Kira, F. Jahnke, W. Hoyer, S.W. Koch, Prog. Quantum Electron. 23, 189 (1999).




Auger Recombination Processes

The calculation of carrier recombinations due to Auger processes and the inverse process, carrier generation due to impact ionisation, requires to solve complex quantum-Boltzmann type scattering processes in second Born-Markov approximation. The general equations that have to be solved have been known for decades. However, mostly due to numerical limitations, previous attempts to solve them have applied uncontrolled approximations for the involved (Coulomb) coupling matrix elements, spin-, k-, or band-summations. With these approximations the accuracy of the results is greatly reduced by up to one order of magnitude or more.
The main difference between our calculations and what has been done in the past is that we do not use any such approximations but explicitely solve all involved integrations and summations. As a result, our calculations have been shown to agree with the experiment within less than a few ten percent uncertainty.
The shortcomings of the use of an Auger constant, C, and a power law, CN³, instead of calculating the underlying processes explicitly are demonstrated here.

For more details about this approach see Ref.[28]. For examples of the results of our approach see e.g. the description of the closed loop design or the examples.



© 2022 Nonlinear Control Strategies | All Rights Reserved | Design: alturas design